PRODUCTS CATEGORIES
Plastic Balls
We manufacture industrial plastic balls for various applications and consumer products, including polypropylene balls, teflon balls, nylon balls.Low-weight, non conductive, corrosion and chemical resistant. These balls are being used in a wide variety of applications including check valves, flow and liquid level indicators, and unlubricated bearings. Plastic balls are also used as agitators in aerosol spray cans, lightweight check valves, medical diagnostics and a wide variety of other applications.
Delrin POM Ball
PE Ball
PP Ball
PTFE Ball
PA Ball
ABS Ball
PC Ball
PS Ball
PMMA Ball
DELRIN Balls (ACETAL RESIN-POM)
| Material | DELRIN Balls (ACETAL RESIN-POM) |
|---|---|
| Size | Φ2.381mm—Φ38.1mm |
| Grade | G0-G3 (±0.01-0.05mm) |
| Density | Around: 1.4g/cm3 |
| Feature | Performance: it is similar to nylon, but slightly harder than nylon, slightly larger than the density recommended products applied to the required low water absorption |
| Applications | POM ball table and drawer slide device is typically used, bearings, rollers, valves, and electronic apparatus, sailing apparatus. |
Polypropylene Balls(PP)
Polymide--PA66
| Material | Polypropylene Balls(PP) |
|---|---|
| Size | Φ2.381mm—Φ38.1mm |
| Grade | G0-G3 (±0.01-0.05mm) |
| Density | Around: 0.85g/cm3 |
| Feature | Low weight, good mechanical characteristics and corrosion, fatigue and collisions resistance. offer excellent electrical insulator, with low dielectric constant and loss factors. Polypropylene balls are highly resistant to acids, alkalis, alcohols and many inorganic chemicals, and are non-toxic. |
| Applications | PP ball is mainly used for transfusion, level calibration indicator. |
| Material | Nylon Balls (Zytel®, Polymide–PA66) |
|---|---|
| Size | Φ2.381mm—Φ38.1mm |
| Grade | G0-G3 (±0.01-0.05mm) |
| Density | Around: 1.1g/cm3 |
| Feature | The nylon has preferably the alkali metal, to adapt to the neutral characteristics of petroleum products and all kinds of chemical products. |
| Applications | Used in check valve, light load, the knob pull switch, low-cost, but also for better flexibility requirements, high hardness aspects |
Teflon Balls-PTFE
Plastic ball (PEEK)
| Material | Teflon Balls-PTFE |
|---|---|
| Size | Φ2.381mm—Φ38.1mm |
| Grade | G0-G3 (±0.01-0.05mm) |
| Feature | Excellent chemical stability, resistance to corrosion, sealing, high lubricity non-tackiness, electrical insulation and good anti-aging Stamina. Continuous use temperature range of -180 ° C to 250 ° C. PTFE (Teflon ), excellent corrosive resistant possessed electrically insulating material, |
| Applications | Particularly suitable for use in cryogenic liquids and acids under the conditions of the instrument. |
| Material | PEEK |
|---|---|
| Size | Φ2.381mm—Φ38.1mm |
| Grade | G0-G3 (±0.01-0.05mm) |
| Feature | Low creep,Excellent friction performance,Especially wearable,Excellent chemical resistance,Flame retardant,Non-toxic |
| Applications | High-end machinery and aviation technology |